Product Features

• Perfect fit installs with no fuss or modifications

• Reduce charge air temperatures drastically for more horsepower

• FDS system utilizes core more evenly then competitors

• Increases horsepower and torque

• Removes power robbing heat soak

• Includes bung for easy setup of water/meth nozzles

• Large bar and fin core measures 16.39" x 24" x 2.25"

• 93% more intercooler core volume than OE MQB GTI

• Fully machined mounting bosses for a perfect fit

• Fully machined inlet/outlet connections for a leak-free seal

• Perfect OEM fitment, no trimming required

• Large 2.75" inlet and outlet connections

• 5 ply silicone hoses ensure reliability

• Includes all necessary hardware and hose clamps for installation

IE MK7 & MK7.5 2.0T/1.8T FDS Intercooler | Fits VW Golf R, GTI, Golf & Audi A3, S3

Out of Stock - Contact us for ETA.


This intercooler is used in record breaking cars! Increase horsepower and defeat heat soak with the IE FDS (Flow Distribution System) front-mount Intercooler Kit for the MK7/MQB 2.0T EA888 Gen 3 engines.

Product Summary


The IE FDS (Flow Distribution System) has proven to distribute charge air uniformly across the inlet end of the core. In contrast to other intercoolers on the market which rely on natural airflow across the core, our FDS technology uses precisely shaped and placed fins cast into the intake plenum to fully take advantage of the large core volume effectively using the entire core. As a result, the IE FDS intercooler has been proven to reduce intake air temperatures more so than other units available, thus offering the largest power gains possible.




When you begin modifying your VW MK7/Audi MK3 Golf R, GTI, A3, or S3 it will become necessary to upgrade the intercooler. Once upgrades such as ECU tuning, exhaust systems, and turbo upgrades are introduced, intake air temperatures begin to rise, resulting in massive power loss. The IE front-mount intercooler system was designed to directly replace the factory unit, while utilizing a much larger core and our proven FDS (Flow Distribution System) to effectively utilize that larger core. These features allow for much higher cooling efficiency than the factory system, thus reducing intake air temperatures and safely increasing horsepower output. The IE FDS intercooler is also a direct fit, requiring no cutting, modification, or time-wasting hassle during installation. Read below for more in-depth information on each intercooler feature.



Heat soak occurs when the heat generated exceeds the cooling capacity of the intercooler. The most common symptom is the noticeable loss of power after long term acceleration or several back to back power pulls.

By greatly increasing the core size and useable area of the core with FDS technology, we have eliminated the heat soak, keeping the intake air temperatures consistently lower than OEM and competition intercoolers.



Unlike other intercoolers that are simply put together to fit on the car and offer a larger core, the IE FDS intercooler line receives special treatment from start to finish. Our engineering department use Computational Fluid Dynamics (CFD) software to optimize the end tanks and FDS system for minimum pressure drop and maximum flow. 

Once the end tanks have been designed and flow has been optimized, the 3D models head over to our 3D printing studio to manufacture the initial prototype. The 3D printed end tanks fastened onto a production core for testing. To validate the FDS technology, we test each model of intercooler in a controlled environment on our in-house engine dyno.

A total of 16 temperature probes are placed on the core, with a column of 8 on either side. This allows us to collect data at multiple points on the inlet side and outlet side of the intercooler to verify temperature distribution across the core. Once that data has been collected, it is analyzed and used to determine if changes in location or pitch of FDS channels are necessary before going to production.



Along with lower intake air temperatures, the large core within the IE intercooler also decreases pressure drop when compared to the factory unit. Simply put, pressure drop is the amount of pressure that is lost as air travels through the intercooler. As boost pressure is raised, pressure drop typically begins to climb. By using a larger core that flows much more freely than the factory core, pressure drop is reduced, reducing the need for the turbocharger to work harder to produce the required boost levels.



Not only does it offer the highest cooling efficiency on the market, the IE FDS intercooler also offers perfect OEM replacement and requires no modifications to install.
Many other kits available require cutting and drilling for fitment, which is the last thing you want to do to your MK7. With CNC machined mount points, each and every IE intercooler allows you to reuse the factory mounting points and installs as if it were a factory piece.

You will also find that the IE intercooler receives the same attention to detail and quality as every other IE product, with U.S cast and machined end tanks, precise TIG welding, and a dense bar-and-plate core. Every intercooler is tested on our in-house intercooler testing station before shipping, ensuring that it is ready to install.  



The IE MK7 intercooler comes complete with high quality, 4 ply reinforced silicone hoses, which allow connection directly to the factory outlet and throttle pipes. We also include every piece of hardware needed for installation.



Installation is straightforward with basic tools but may include a few more technical steps and draining of coolant. The process should take around 3-4 hours hour for an experienced technician, and possibly longer for the automotive enthusiasts. We recommend you familiarize yourself with the installation process before attempting. CLICK HERE to view and download Install Guide.

Power charts





power gains over stock












  • AUDI - A3 2015+ (MK3 - 8V) 1.8T & 2.0T

  • AUDI - S3 2015+ (MK3 - 8V) 2.0T

  • VW - GTI 2015+ (MK7 & MK7.5) 2.0T

  • VW - Golf R 2015+ (MK7 & MK7.5) 2.0T

  • VW - Golf 2015+ (MK7 & MK7.5) 1.8T

View the install guide here!




  • At what point will I need the IE FDS intercooler for my car?

With extensive testing, we have found that cars with stage 2 software or higher will benefit from upgrading the intercooler. It is absolutely necessary to upgrade with a big turbo setup as well.

  • What all is included with the IE FDS intercooler?

The intercooler kit includes the direct-fit core and all install hardware including heavy duty black silicone hoses, silicone hose clamps, necessary bolts and washers, and an installation manual.

  • Are there any modifications required to install the intercooler?

No! The IE FDS intercooler is a direct replacement for the applications listed above. There is no trimming, cutting, or modification needed for installation.

  • Do I need to purchase anything else to install the IE FDS intercooler?

This intercooler includes all necessary hardware and parts for installation. Since installation requires removal of the radiator, you will need to drain the cooling system. We also offer coolant, which is available separately. Aside from that, there is nothing else needed for installation.

  • What kind of power increase will I see with the IE FDS intercooler?

Power increase is dependent on the turbo setup and the boost levels that you are running. The larger the turbo setup and the higher the boost pressure, the larger the gains will be with the IE FDS intercooler.

  • How much horsepower will the intercooler support?

We have tested the IE FDS intercooler to over 600hp successfully with room to grow. Supported power is in the 650-700hp range, but will ultimately depend on the turbo setup and operating conditions.

Share your thoughts on this product Write a review
Read Full Review
I think I love this!
Moving to Texas with a new downpipe, and stage 2+ ECU tune, I figured I needed to add an intercooler. IE was suggested to me, and I'm very pleased. Excellent customer service, and prompt delivery. Looking forward to many years of happy driving!
Read Full Review
I didn't expect it to make more power
In the past I've always been told that intercoolers "don't add horsepower". I installed the integrated intercooler on my Audi S3 which had a tune on it that was fairly aggressive and was pulling a little bit of timing. The integrated intercooler not only eliminated all of the timing pull, but my tuner was actually able to give me a more aggressive tune because of it.

I am also a big fan of parts that are able to fit my car without any modification. I was very happy to see that during installation I did not have to modify any of my car at all. The engineering in this kit is spectacular. I look forward to buying more parts from integrated engineering for my car in the future.
Read Full Review
Must have
This product is awesome. Defiantly noticed improvement
Write Your Own Review

You're reviewing: IE MK7 & MK7.5 2.0T/1.8T FDS Intercooler | Fits VW Golf R, GTI, Golf & Audi A3, S3

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Product rating
Customers Who Bought This Item Also Bought
Need Some Sticker power? X

Get IE sticker-charged.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

By submitting your Email address you are signing up for the IE Mailing list. you may opt out at any time.