IE MK5 & MK6 2.5L 5 CYLINDER COLD AIR INTAKE KIT

IE MK5 & MK6 2.5L 5 CYLINDER COLD AIR INTAKE KIT

$299.99

Item #: IEINCB1


Overview

VW MK5/MK6 2.5L COLD AIR INTAKE KIT

air intake

VOLKSWAGEN MK5 & MK6 2.5L HIGH-FLOW COLD AIR INTAKE KIT APPLICATIONS

  • VW MK5 Rabbit 2.5L
  • VW MK5 Jetta 2.5L
  • VW MK6 Golf 2.5L

VOLKSWAGEN MK5 & MK6 2.5L COLD AIR INTAKE KIT FEATURES

  • INCREASED HORSEPOWER & TORQUE - Increase your power output across the entire RPM range
  • ENHANCED ENGINE &THROTTLE SOUND  - Add excitement to your drive
  • HIGH-FLOW RAM AIR FILTER - Increases air velocity for maximum performance 
  • BLACK POWDER COAT FINISH - Looks great in your engine bay
  • MAINTAINS ALL OE EMISSIONS SYSTEMS - Hassle free install and maintains emissions compliant
  • EASY INSTALL - No modifications needed to the car & is easily reversible
  • INCLUDES ALL INSTALL PARTS & HARDWARE - No unwanted trips to the auto parts store
  • HEAT SHIELDING & DIRECTED AIR FLOW - For lowest possible intake temperatures
  • REINFORCED SILICONE INLET HOSE - For reliablity and longevity
  • FITS AUTOMATIC AND MANUAL TRANSMISSIONS - All transverse 2.5L 5 cylinder MK5 engines

VOLKSWAGEN MK5 & MK6 2.5L COLD AIR INTAKE KIT DETAILS

overview

OVERVIEW
Feed your MK5 2.5L 5 cylinder engine with a supply of col
d air with this direct-fit cold air intake kit. This intake features a generously-sized inlet hose that connects to the OE mass air flow (MAF) sensor.  Our high-flow ram air filter is neatly housed within a heat shield, which separates the air filter from hot under-hood air, allowing only cold air to be drawn in to the turbo inlet directly from the front of the car.

DIRECT FIT
This air intake kit provides all the necessary harware, adapters and couplers to plumb the intake system from the intake manifold to the MAF and then to the air filter. The heat shield installs securly for reliable mounting with no rubbing or interfeirence with other factory parts.  Our specially molded silicone intake hose features machined adapters for the OE emissions systems, so nothing is left unplumbed.

COLD AIR HEAT SHIELD
The IE heat shield is designed to create a thermal barrier blocking all of the radiant heat from the engine bay. Only cold air from the front of the vehicle is drawn into the filter from the opening in the radiator support keeping air intake temperatures as cold as possible. This allows factory placement of the intake to be used without placing the filter lower in the vehicle where it can be subjected to engine harming road debrees or fluid.

directfit

VOLKSWAGEN MK5 & MK6 2.5L COLD AIR INTAKE FAQ

-When is the best time to upgrade to the IE Cold Air Intake?
The IE VW 2.5L Cold Air Intake is designed as an upgrade for cars at any point, from factory and up.  This is a very popular modification for factory and is highly recommended for Stage 1 tunes and up.

-What all is included with the IE Cold Air Intake?
The intake kit includes the direct-fit heat shield, air filter, inlet pipe, billet hose clip adapters, and all install hardware including heavy duty black silicone hoses, and hose clamps.

-Is there any modification required to install the IE Cold Air Intake?
No! The IE intake kit is a direct replacement for the applications listed above. There is no trimming, cutting, or modification needed for installation and the vehicle can be put back to stock at any time.

-What kind of power increase will I see with the IE Cold Air Intake?
Power increase is dependent on the software and hardware setup that you are running. With higher out-put software tunes and supporting hardware, the larger the gains will be with the IE intake kit. 

-Can I use an aftermarket intake manifold with the IE Cold Air Intake?
This kit is designed to be a direct bolt-on kit for the factory installed intake manifold on all MK5 2.5L 5 cylinder engines.  If you are looking to run our IE 2.5L performance intake manifold, you will need to run the specific manifold air intake kit IE part number: IEIMVB2