BE UP TO DATE ON NEW PERFORMANCE SIGN UP FOR OUR EMAIL LIST
Background image
IE CNC Ported 2.0T FSI Cylinder Head (BARE)
IE CNC Ported 2.0T FSI Cylinder Head (BARE) IE CNC Ported 2.0T FSI Cylinder Head (BARE) IE CNC Ported 2.0T FSI Cylinder Head (BARE) IE CNC Ported 2.0T FSI Cylinder Head (BARE) IE CNC Ported 2.0T FSI Cylinder Head (BARE) IE CNC Ported 2.0T FSI Cylinder Head (BARE) IE CNC Ported 2.0T FSI Cylinder Head (BARE)

Product Features


• CNC PERFECTED PORT SIZE AND ANGLES

• SUPPORT HIGH POWER AND TORQUE RELIABLY

• READY FOR HIGH RPM N/A OR BOOSTED BUILDS

• INCLUDES PERFORMANCE LIFTMAX VALVE JOB

• COMPLETE NEW VALVE TRAIN INSTALLED

• VERIFIED INSPECTION PROCESS ON EVERY HEAD

• ASSEMBLED IN-HOUSE BY IE RACE ENGINE TECH 

IE CNC Ported 2.0T FSI Cylinder Head (BARE)

Maximize your cylinder head performance with the most advanced CNC porting program for your 2.0T FSI EA113 cylinder heads available. Gain large power gains through the entire power band all the way to redline.  

Availability: In stock

$2,295.00
SKU: IECHVC1-CONF

* Required Fields

 

Product Summary

BARE CYLINDER HEAD

This Integrated Engineering FSI 2.0T FSI EA113 CNC ported cylinder head does not include valves or springs and retainers.  You will receive the cylinder head machined, CNC ported, and complete with intake valve seats, and IE valve guides installed. If you would like the head supplied with valves and a spring & retainer kit installed, see our CNC assembled head (IE Part number: IECHVC2). 

 

CORE CHARGE INFORMATION

We require a good usable core head to be sent in for porting or a new cylinder head  to be purchased. If sending in a core head for machining, you will be emailed an inspection and exchange form with instructions on how to confirm that your head is usable as a core.

 

CNC PORTING ADVANTAGE

The Integrated Engineering CNC Ported cylinder head provides large power gains from the middle of the power band all the way to redline. Large airflow increases are obtained by a combination of changing the port shape via CNC porting and re-cutting the valve seat geometry. We worked closely with an industry expert who has over 30 years of OEM and professional motorsport experience to deliver these results. Street drivability was preserved by careful development that does not sacrifice torque and airflow velocity. 

From the outside of the head all the way through, our ported head delivers performance. The intake and exhaust ports are masterfully crafted to deliver maximum airflow without sacrificing torque. Our proprietary LiftMAX valve job was specifically developed for the unique conditions found in a VW / Audi engine. It gets the most airflow from the small valve lifts and bore sizes which are unique to these engines. These incredible gains are only possible through the combined efforts of modifying both the ports and the valve seat geometry.

The end result is the best performing 2.0T FSI EA113 cylinder head on the market. Our CNC ported cylinder head offers the maximum power increase at an incredible value. You will not find another head on market that includes all the features and extensive machine work found in this cylinder head.

 

LIFTMAX VALVE JOB

Integrated Engineering’s LiftMAX valve job is designed to extract the most power and flow from our CNC port design. The LiftMAX valve job accounts for application specific factors such as small cylinder bores and relatively low lift camshaft profiles. Placing a strong emphasis on the valve job is essential to get the most out of any CNC port before air enters the combustion chamber.

 

REMANUFACTURING PROCESS

When it comes to performance cylinder heads, a complete remanufacturing process is the only acceptable method. Integrated Engineering does this by completely stripping the cylinder head, unplugging and then purging all oil galleys, and removing valve guides prior to CNC porting. After the porting process we install new Integrated Engineering guides, skim cut the cylinder head deck surface to ensure a perfect head gasket seal, recut the valve seats for Ferrea racing valves, and then perform a final quality control inspection.  

 

INCLUDED PARTS

 

  • IE VALVE GUIDES

During the development process we determined that using the OEM valve guides would not be sufficient. By porting a head with OEM valve guides installed the overall length of the guide is shortened which results in valve stability issues and increased wear on both the valve seat and the guide itself. To remedy this, Integrated Engineering installs new guides after the porting process. Integrated Engineering guides feature a proprietary alloy which improves wear resistance and heat transfer from the valve to the cylinder head. These two factors result in increased longevity of your valvetrain components, as well as decreased knock and more power.

CNC PORTING FLOW CHART


As the flow table above shows, the Integrated Engineering ported cylinder head increases flow up to 75 CFM or 34% on the intake side and 40 CFM or 25% on the exhaust side. This results in a flatter and longer powerband that will take your 2.0T FSI engine to another level whether on the street, drag strip, or road course.



FSIPORTS

VEHICLE FITMENT



  • AUDI - A4 2005-2008 (B7) 2.0T FSI

  • AUDI - A6 2005-2011 (C6) 2.0T FSI

  • AUDI - A6 Allroad 2005-2011 (C6) 2.0T FSI

  • AUDI - TT 2008-2015 (MK2 - 8J) 2.0T FSI (Early timing belt driven engines)

  • AUDI - TTS 2008-2015 (MK2 - 8J) 2.0T FSI

  • AUDI - A3 2006-2013 (MK2 - 8P) 2.0T FSI (Early timing belt driven engines)

  • AUDI - S3 2006-2013 (MK2 - 8P) 2.0T FSI

  • VW - GTI 2006-2009 (MK5) 2.0T FSI (Early timing belt driven engines)

  • VW - Golf R 2012-2012 (MK6) 2.0T FSI 

  • VW - Jetta & Jetta GLI 2006-2010 (MK5) 2.0T FSI (Early timing belt driven engines)

  • VW - Passat 2006-2010 (B6) 2.0T FSI (Early timing belt driven engines)

  • VW - EOS 2006-2015 (1F7) 2.0T FSI (Early timing belt driven engines)

REQUIRED HARDWARE:


The IE LiftMAX valve job is designed around specific Ferrea oversized intake and exhaust valves, no other valves can be used.



  • Required intake valves: F2180P

  • Required exhaust valves: F2178P


 


RECOMMENDED HARDWARE:


Although other valve spring & retainer kits will fit and can be used, we highly recommend using our IE 2.0T valve spring & retainer kit with our CNC ported cylinder heads. IE valve spring & retainer kit features specific spring and retainer designs that are perfectly matched to perform reliably with our LiftMAX valve job, Ferrea valves, and cylinder head port design. 



  • IE 2.0T FSI Valve Spring & Retainer Kit: IEVTVC3


 

FAQ



  • What kind of gains will I see with this CNC ported head? How will it affect my driving experience?


Gains will vary with each setup, although gains are primarily in the higher RPM range. Power gains are typically higher on engines with larger turbos and larger camshafts installed. You will immediately notice the power no longer “dropping off” as RPMs increase, pulling much harder until redline.



  • Why CNC porting instead of hand porting?


This head porting program incorporates far more research and development than is possible in a one off, custom hand porting project. CNC cylinder head porting also offers repeatability and consistency that is nearly impossible to achieve when porting by hand. The end result is more consistent flow between cylinders.



  • What changes will need to be made to my software?


Although many aftermarket files can self-adapt to changes, custom tuning may be required, as airflow is increased greatly at high RPMS.  Please contact your tuner for more information.



  • Can I use other valves than Ferrea +1mm with your cylinder head?


No. Because our LiftMAX valve job was designed specifically around these valves you must use them. Ferrea has over 30 years of motorsports experience; you will not be disappointed.



  • How important is a performance valve job?


Extremely. Many of the gains achieved through the CNC port design would not be fully realized without a professionally done valve job.



  • Do you ship assembled heads with camshafts installed?


We only ship cams installed when a customer is ordering a full long block (complete engine). This is to prevent damage to valves that may be extended past the deck surface.



  • Will this head fit my car?


This head will fit all 2.0T FSI EA113 (timing belt driven) engines found in many VW and Audi vehicles

Share your thoughts on this product Write a review
Write Your Own Review

You're reviewing: IE CNC Ported 2.0T FSI Cylinder Head (BARE)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Product rating
Customers Who Bought This Item Also Bought
Need Some Sticker power? X

Get IE sticker-charged.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

By submitting your Email address you are signing up for the IE Mailing list. you may opt out at any time.