Product Features


• Genuine K04 Provides 330-350HP

• Modified to accept diverter valve in OE location for easy, clean installation

• Includes all installation hardware

• Genuine Borg Warner Reliability

• Uses all OE Hoses and Lines

IE K04 Turbo Kit MK6 2.0T TSI

Limited Stock - Order Soon!

$1,999.99
SKU: IETPCC5

The IE K04 hardware kit comes with a modified genuine Borg Warner K04 and hardware for a easy installation. This easy bolt-in turbo kit increases power to 330-350+hp depending on supporting mods, and provides factory like reliability!

Product Summary
Details

POWER GAINS

With correct software  and bolt ons this turbo will bump you up into the 330-350hp range on pump fuel. Typically you’ll want a downpipe, intake, intercooler and software. 6 Speed manual cars will also need an upgraded performance clutch.

 

TECHNICAL DETAILS

From the beginning our engineers wanted to make this K04 a simple, quick installation, without adding a lot of extra parts and mess. So, our team actually machines the compressor covers of the Borg Warner K04 turbocharger and attaches an adapter plate to allow the diverter valve to fit exactly in it’s OE location for TSI engines. This makes the installation quick, neat, and with no fitment issues you might have with aftermarket Diverter relocation kits. No wiring is required as a consequence of this.

BIG POWER AND FUN TO DRIVE

The K04 turbocharger is a great turbocharger for the Gen 2 TSI engine. It delivers 330-350 horsepower which is a good, reliable amount on the stock engine. It makes the car an absolute riot to drive without becoming a chore to own and operate.

 

PERFECT FITMENT AND RELIABILITY

This turbocharger is an OEM turbocharger from the MK6 Golf R. We then modify it to place the diverter valve in the OE location so the fitment is exactly like stock for an easy install.

 

CLASSY AND  CLEAN APPEARANCE

Once installed, the K04 appears entirely OE except for your bolt ons such as cold air intakes. By keeping the diverter in it’s OE location there are no ugly diverter relocation kits running silicone hoses all over your bay.

 

EASY INSTALLATION

This K04 has been modified to drop into place of the factory turbocharger with minimal work. CLICK HERE to view or download the full installation guide.

Fitment

VEHICLE FITMENT

  • VW - GTI 2006-2009 (MK5) 2.0T TSI (timing chain driven) engines EA888 Gen 1 & Gen 2
  • VW - GTI 2010-2014 (MK6) 2.0T TSI (timing chain driven) engines EA888 Gen 1 & Gen 2
  • VW - Jetta & Jetta GLI 2010-2014 (MK6) 2.0T TSI (timing chain driven) engines EA888 Gen 1 & Gen 2
  • VW - CC 2009-2015 (3C8) 2.0T TSI (timing chain driven) engines EA888 Gen 1 & Gen 2
  • VW - Passat 2006-2010 (B6) 2.0T TSI (timing chain driven) engines EA888 Gen 1 & Gen 2
  • VW - Tiguan 2009+ 2.0T TSI (timing chain driven) engines EA888 Gen 1 & Gen 2
Additional hardware

ADDITIONAL SUPPORTING UPGRADES


This IE K04 turbocharger kit is a turbo hardware only upgrade kit, and requires additional hardware and software to complete the installation.


K04 ECU SOFTWARE


The upgraded turbo kit and additional hardware will require a software upgrade to the factory ECU. Make sure you source a K04 turbo specific tune to complete your upgrade.


 


COLD AIR INTAKE


When upgrading to a larger turbocharger it is important to make sure your intake can supply your turbo with plenty of flow. We highly recommend upgrading to a performance air intake such as the IE Cold Air Intake Kit for MK5 & MK6 TSI Engines. IE Part Number: IEINCC2


 


PERFORMANCE INTERCOOLER


The increased size, flow, performance, and boost of the larger K04 turbocharger will dramaticially increase the charge air temperatures and quickly cause heat soak. Once your intercooler is heat soaked, you will quickly lose huge amounts of power as intake air temps rise. Keep your K04 kit performing at its peak with an IE Audi & VW MK5 & MK6 2.0T FDS High Performance Intercooler. IE Part Number: IETPCB1


 


PERFORMANCE DOWNPIPE


The factory restrictive downpipe can not provide adequate support for the larger K04 turbocharger, upgrading to a aftermarket performance downpipe is required for optimal power output. IE recommends a 3" downpipe to match your new K04 kit.


 


SPARK PLUGS


It is also recommended to upgrade to a higher output spark plug to provide plenty of spark for the increased cylinder pressure. IE recommends a set of NGK BKR7EIX Iridium Spark Plugs. IE Part Number: HW-PLUGS-BKR7EIX-GAPPED-DPS

Reviews
Share your thoughts on this product Write a review
Read Full Review
Awesome
My GTI is completely modified, intercooler, inlet tubes, intake, exhaust, ecu tcu software, suspension, mounts, etc, except for the turbo.. Recently, my stock turbo blew, the VW dealer asked if I would like to upgrade to the K04. Their parts guy recommended using this kit. I pulled the trigger and bought the IE K04 kit. The power and responsiveness is unbelievable, I love it! With this kit added to my GTI, I have to ask, why didn’t the car originally come like this? By far, the best investment I have made.
Write Your Own Review

You're reviewing: IE K04 Turbo Kit MK6 2.0T TSI

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Product rating
Video

IE TSI K04 KIT

Need Some Sticker power? X

Get IE sticker-charged.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

By submitting your Email address you are signing up for the IE Mailing list. you may opt out at any time.