Product Features


• Gain of 15-20 horsepower and torque

• Massive 5 inch diameter air filter

• High-flow velocity stack

• Delivers cold air to your supercharger

• Cleans up any engine bay

• Perfect fitment by utilizing factory airbox mounts

• Black powder coated velocity stack and heat shield

• Durable 3-ply silicone coupler

• Heat shielding for extra protection against heat

IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5

Out of Stock - Contact us for ETA.

SKU: IEINCG2-CONF
1 x IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5   +$349.99

* Required Fields

Price as configured: $0.00

Force feed your Audi S4 or S5 3.0T supercharger direct high-flow rammed air with and IE Cold Air Intake! The perfect addition to your engine bay, instantly add horsepower, torque, snappy throttle response, and an aggressive supercharger sound. Typical peak gains from our CAI are roughly 15-25+ Horsepower and Torque on a tuned car.

Product Summary
Details

POWER GAINS

The ram air design, velocity stack, and a massive 5-inch filter inlet help deliver the most HP possible from a cold intake system.

  • Expect peak gains of 15-20+HP/TQ on tuned engines. 

 

INCLUDED IN THE 3.0T S4/S5 IE CAI KIT

  • IE velocity stack & heatshield assembly
  • IE silicone Supercharger inlet pipe assembly
  • IE 5” inlet performance air filter
  • IE secondary air injection system filter assembly
  • All necessary hardware (clamps, nuts, bolts, etc)

 

OPTIONAL CARBON FIBER LID

IE's 2nd generation Cold Air Intake for B8/B8.5 S4 or S5 3.0T engines now includes a small set of holes under the weather stripping that will allow an easy install of a new highly stylized carbon fiber lid. This carbon lid has been specially designed to not only fit the IE CAI, but to also conform to the factory engine bay for a 100% perfect fit and finish. If you are looking to have a stylized and classy finish in their engine bay, look no further than the performance leading IE Cold Air Intake and optional Carbon Fiber Lid! 

 

DESIGN DETAILS

IE engineers set out to produce the highest performing cold air intake that looks great and fits like a factory installed part in your S4. The latest in computer design and 3D scanning technology were employed during the development process for a perfect fit and maximum performance. The final product resulted in the greatest performing and best-looking intake available.

 

INCREASED AIR FLOW

This Intake delivers an impressive flow increase to feed your supercharger and engine. More cold air flow means more power, especially during the hot summer months. Ditch your stock restrictive airbox for the IE intake System.

 

HIGH-FLOW VELOCITY STACK

Delivering cold air to your engine is a must for making power. The velocity stack efficiently channels air as quickly as possible into the intake system. The velocity also functions as a solid mount for the air filter which means no intake pipes rattling on heat shields.

 

CUSTOM HEAT SHIELD

IE uses a multi-piece heat shield which performs and looks great. It effectively channels cold air from the front of the car to the massive performance filter. Furthermore, it eliminates the induction of hot air found in other locations of the engine bay further protecting against power robbing heat off the exhaust and supercharger.

 

PERFECT FITMENT FOR 3.0T SUPERCHARGED ENGINES

This Intake fits B8 & B8.5 Audi S4 3.0T V6 Supercharged engines without any modification or installation hassles. The install process is simple and can be done quickly with basic tools. The fact that IE intake utilizes the factory airbox mounts ensures a perfect and hassle-free fit. Additionally, the stock mounts allow for engine movement which keeps intake components from getting damaged.  

 

CLASSY AND  CLEAN APPEARANCE

Wrinkle black powder coated velocity stack and heat shields result in a sleek and sporty appearance in any engine bay. As a final touch, all IE heat shields are finished with a classy, laser etched, stainless steel IE logo badge.

 

EASY INSTALLATION

Installation is a quick and easy install with basic tools. The process should take around an hour for most enthusiasts. CLICK HERE to view and download the IE B8 S4 Cold Air Intake Install Guide.

Power charts

B8 S4 CAI DYNO POWER RESULTS


The following power result data was collected on our in-house Dynapack hub dyno. Dyno chart is as tested at 4500 feet altitude with SAE corrected numbers. Before and after results are direct back-to-back comparisons on a full bolt-on stage 2 B8 S4 3.0T engine. The only change made to the vehicle between testing is the swap from a stock intake with a new clean air filter to the IE Cold Air Intake Kit. Dyno power results are approximate and may vary from car to car. 


 


HORSEPOWER & TORQUE DYNO CHART


B8 S4 CAI Dyno Chart

Fitment

VEHICLE FITMENT

  • Audi - S4 2009-2015 (B8-B8.5) 3.0T
  • Audi - S5 Coupe 2013-2015 (B8.5) 3.0T*
  • Audi - S5 Cabriolet 2009-2015 (B8-B8.5) 3.0T*

*Does NOT fit early model S5 vehicles with 4.2L V8 engines.

Reviews
Share your thoughts on this product Write a review
Write Your Own Review

You're reviewing: IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Product rating
Customers Who Bought This Item Also Bought
Need Some Sticker power? X

Get IE sticker-charged.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

fill the required field below and we will send you a free high-quality color UV laminated IE sticker.

By submitting your Email address you are signing up for the IE Mailing list. you may opt out at any time.